Wheelchair Loading Ramps by Scorpion Ramp, Inc.

A portable wheelchair ramp you can count on! Get your motorized wheelchair or motorized scooter in and out of any truck or van with confidence. Scorpion ramp's compressed arch design allows you to load your wheelchair or motorized scoorter safely with no scary bending, wobbling or folding. Scorpion Ramps are also great as temporary wheelchair ramps over steps, providing a tractioned, sturdy surface in any weather. These portable wheelchair loading ramps are 10 feet long and 36" wide, allowing it to fit in any standard 3' doorway, with plenty of lateral space. As a portable wheelchair ramp, you won't find better: It's got a 1200 lb duty rating and a 3000 lb capacity. Scorpion is the best portable loading ramp money can buy!

ADA Wheelchair Ramp Compliance
The wheelchair Ramp's 10 foot length will meet or exceed 1:12 slope for a typical riser, graduated arch design prevents high centering. Its the best portable ramp available for a temporary or removable wheelchair loading ramp.

Scorpion portable wheelchair ramps require less than three square feet of storage space, fold to a 9" depth, weigh in at 78 lbs, and are equipped with wheels for easy transport. A punched and raised aluminum traction platform allows for safe use, even when wet. The ramp's patented compressed arch design allows for maximum strength and stability during use. Stainless steel hinges and lack of structural welds insure a long life and unequalled durability. Scorpion Ramp's design is pure genius, see for yourself.

Scorpion ramps exceed ADA standards as a wheelchair loading ramp; To be ADA compliant for general wheelchair ramp ratings, you'll need to cover the ramp with a tractioned mat and allow for handrails on either side of it(anchored to the ground, not the ramp). Full details on ADA standards for permanent wheelchair ramps can be found here.

Plenty of room for transportation, stowed ramp does not impede tie-down locations
  • Platform Ramp style: No channels to squeeze the wheelchair into while loading onto the ramp, just drive it straight up.
  • 10' length allows for lower incline on the loading edge than most portable wheelchair ramps available: Manned wheelchairs have less incline to deal with than other loading ramps!
  • Get Your Wheelchair loaded without a hitch! Scorpion ramps come with two belt straps to secure the ramp to the loading point. No legs, hitches or parts to lose, it's all one unit. Great for trucks, vans, even side-loading!
  • Compressed arch design allows for smooth and sturdy loading and unloading, no lateral sagging. Your manned wheelchair or scooter loading experience will feel sturdy and safe.
  • No structural welds means the wheelchair or scooter's weight is distributed on one-piece 1/8" 5052 aluminum and stainless steel, no weak points.
  • One piece, no assembly No parts to lose. Deploy, load and stow the ramp in under five minutes your first time!
  • Full width punched & raised aluminum traction platform for safe use even when the ramp is wet.
  • Two belt straps included for secure attachment to loading edge. Scorpion ramp doesn't go anywhere until you want it to.
  • Machined aluminum ball bearing wheels for easy transport, easy to roll the ramp to the loading point.
  • 78 lb complete unit weight weighs less than the luggage! Load, stow and go.
  • 3,000 lb capacity, 1,200 lb duty rating* that's over THIRTY-EIGHT TIMES it's weight. You can use it as a wheelchair ramp, motorized scooter ramp, manned or not, Scorpion ramp can handle it!
  • 120" long, 36" wide at base, 34" width at loading edge* Ten foot length offers less incline than shorter ramps, three foot width allows plenty of wiggle room while offering complete end point contact to your tailgate, van, or trailer.
  • 30 square feet of traction platform* all that tractioned space on the ramp allows experts and novices alike a safe and confident loading and unloading experience even in the most inclement weather.
  • 10' long, 3' wide, folds to 9"* The folded ramp Needs only three square feet of storage space with 9" depth: That's your smallest closet with room to spare! .
  • Patented multi-purpose, portable design Wheelchairs, motorized scooters, motorcycles, dirt bikes, construction equipment, lawnmowers, trench cutters, bobcats, ATVs; one ramp does it all!
  • Made in the U.S.A.


Patent No. 7,082,637 B1

*measurements vary with quad, snowmobile and single-width ramps 

phone: (360) 790-2350
fax: (360) 456-2718

Scorpion Ramp on YouTube

Scorpion Ramp on Facebook



© Copyright 2007-2018 | Scorpion Ramp, Inc.| all rights reserved